Name: Small Bottle Volumetric Filler (4-Head)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Small Bottle Volumetric Filler (4-Head)?

Accepted Answer

Small Bottle Volumetric Filler (4-Head) is designed for 1,800-3,200 BPH, which makes it a practical filling machine option for reagent, cosmetic liquid, flavoring, and small chemical bottle lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Small Bottle Volumetric Filler (4-Head)?

Accepted Answer

Small Bottle Volumetric Filler (4-Head) is rated at ±0.5% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Small Bottle Volumetric Filler (4-Head) handle?

Accepted Answer

Small Bottle Volumetric Filler (4-Head) supports small bottle, reagent bottle, cosmetic bottle. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Small Bottle Volumetric Filler (4-Head) support?

Accepted Answer

The supported filling range is 30-500 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Small Bottle Volumetric Filler (4-Head) use?

Accepted Answer

Small Bottle Volumetric Filler (4-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

What products is the Small Bottle Volumetric Filler (4-Head) suitable for?

Accepted Answer

This filling machine is suited to reagent, cosmetic liquid, flavoring, and small chemical bottle applications. The actual match still depends on product flow behavior, container format, closure or label requirements, and downstream packaging scope, but the listed applications show the operating window the machine was designed around. Buyers with unusual formulas, fragile packages, or multi-SKU projects can contact PakFill for a custom configuration review.

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	220V / 50Hz
Air Pressure	0.4-0.6 MPa
Production Capacity	1,800-3,200 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	4
Filling Range	30-500 ml
Filling Principle	Volumetric filling
Applicable Container	small bottle, reagent bottle, cosmetic bottle
Power Consumption	1.9
Dimensions (L x W x H)	1,850x1,060x1,760 mm
Weight	300 kg

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	220V / 50Hz
Air Pressure	0.4-0.6 MPa
Production Capacity	1,800-3,200 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	4
Filling Range	30-500 ml
Filling Principle	Volumetric filling
Applicable Container	small bottle, reagent bottle, cosmetic bottle
Power Consumption	1.9
Dimensions (L x W x H)	1,850x1,060x1,760 mm
Weight	300 kg

Small Bottle Volumetric Filler (4-Head)

Small Bottle Volumetric Filler (4-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Volumetric Fillers

Inline Volumetric Filler (6-Head)

Rotary Volumetric Filling Machine (24-Head)

Ready to automate your production?

Small Bottle Volumetric Filler (4-Head)

Small Bottle Volumetric Filler (4-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Volumetric Fillers

Inline Volumetric Filler (6-Head)

Rotary Volumetric Filling Machine (24-Head)