Name: Heating Jacket Piston Filler (2-Head)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Heating Jacket Piston Filler (2-Head)?

Accepted Answer

Heating Jacket Piston Filler (2-Head) is designed for 900-1,800 BPH, which makes it a practical filling machine option for wax, petroleum jelly, cheese sauce, and thick syrup lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Heating Jacket Piston Filler (2-Head)?

Accepted Answer

Heating Jacket Piston Filler (2-Head) is rated at ±0.5% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Heating Jacket Piston Filler (2-Head) handle?

Accepted Answer

Heating Jacket Piston Filler (2-Head) supports glass jar, wide-mouth bottle, plastic tub. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Heating Jacket Piston Filler (2-Head) support?

Accepted Answer

The supported filling range is 200-2,500 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Heating Jacket Piston Filler (2-Head) use?

Accepted Answer

Heating Jacket Piston Filler (2-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

Does the Heating Jacket Piston Filler (2-Head) support hot-fill or temperature-controlled processing?

Accepted Answer

Heating Jacket Piston Filler (2-Head) is configured for 30-90°C jacket heating. That makes it suitable for projects where product temperature must be managed to keep viscosity stable, maintain clean transfer, or support hot-fill operation. Final suitability still depends on the actual formula, dwell time, and container specification, so PakFill should review the full process window before final quotation.

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	380V / 50Hz
Air Pressure	0.5-0.7 MPa
Production Capacity	900-1,800 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	2
Filling Range	200-2,500 ml
Filling Principle	Heated piston dosing
Temperature Control	30-90deg C jacket heating
Applicable Container	glass jar, wide-mouth bottle, plastic tub
Power Consumption	3.6
Dimensions (L x W x H)	1,850x1,150x1,850 mm
Weight	430 kg

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	380V / 50Hz
Air Pressure	0.5-0.7 MPa
Production Capacity	900-1,800 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	2
Filling Range	200-2,500 ml
Filling Principle	Heated piston dosing
Temperature Control	30-90deg C jacket heating
Applicable Container	glass jar, wide-mouth bottle, plastic tub
Power Consumption	3.6
Dimensions (L x W x H)	1,850x1,150x1,850 mm
Weight	430 kg

Heating Jacket Piston Filler (2-Head)

Heating Jacket Piston Filler (2-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Piston Fillers

Servo Piston Filling Machine (4-Head)

Servo Piston Filling Machine (8-Head)

Glass Bottle Sauce Piston Filling Machine

Ready to automate your production?

Heating Jacket Piston Filler (2-Head)

Heating Jacket Piston Filler (2-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Piston Fillers

Servo Piston Filling Machine (4-Head)

Servo Piston Filling Machine (8-Head)

Glass Bottle Sauce Piston Filling Machine